Air to water heat pump 600 kW inverter R290
Reference: AEHDC600-R290
Our AEHDC600 R290 air-to-water heat pump is a high-capacity unit designed for industrial and commercial installations. It uses R290 refrigerant and an inverter compressor, providing high efficiency in both heating and cooling with a very low environmental impact.
Heating
Capacity: 212 to 615 kW max.
COP: 4.98 to 6.93
SCOP: 5.11 (at 35°C)
SCOP: 3.96 (at 55°C)
Cooling
Capacity: 180 to 493 kW
EER: 4.6 to 6.95
Operating conditions
Heating air temperature range: -30°C to +25°C
Cooling air temperature range: +10°C to +43°C
Heat pump outlet temperature (heating): 18°C to 70°C
Heat pump outlet temperature (cooling): 7°C to 22°C
Hydraulics
Hydraulic connection: DN200
Nominal DHW flow rate: 276000 l/h
Acoustics and protection
Operating sound level: ≤ 98 dB(A) at 1 metre
Protection rating: IPX4
Electrical class: I
Construction
Chassis: galvanized steel with spray-painted finish
Unit dimensions: 3000 × 2110 × 2466 mm
Net weight: 3240 kg
Internal components
Compressor: Panasonic or Hitachi or Highly
Plate heat exchanger: SUS316 stainless steel
Fans: DC type
Evaporator: hydrophilic aluminium with internal copper tubes
Electronic expansion valve: SANHUA EEV
Contactors: AC 220 V 150 A ×2
Thermal protection: 48 to 60 A ×2
Controller: microprocessor with LCD touchscreen interface
Electrical supply
Operating voltage: 380 to 415 V / 50–60 Hz three-phase
Low-side pressure: 0.15 to 0.81 MPa
High-side pressure: 2.9 to 3.1 MPa
Recommended cable cross-section: 3 × 500 mm² + 1 × 300 mm²
Packaging
Delivered on a plywood support.
94 000,00 €